PneumaticPlus SAU420-N04G-MEP Compressed Air Filter Regulator Combo 1/2″ NPT – Metal Bowl, Manual Drain, Bracket, Gauge

#ad
PneumaticPlus #ad - Please visit our Amazon Store for our complete line of air products. Diverter blocks may be used to supply air to secondary locations. 10 micron particulate element / flow Rate: 176 SCFM @ 90 PSI. Sal lubricators can be adjusted easily to specifications of your tools and applications for proper protection. The saf filter comes standard with a 10 Micron Particulate element that removes harmful debris and moisture.

The sar regulator provides precision pressure control that can be adjusted and set using the locking knob. Search for different bowl and drain options by typing SAU PneumaticPlus in Amazon's search box. Operating pressure: 0-150 PSI. Saf air filters remove harmful debris and moisture from your air supply. Manual drain, metal bowl w/ sight Glass, Port Size: 1/2" NPT.

PneumaticPlus SAU420-N04G-MEP Compressed Air Filter Regulator Combo 1/2" NPT - Metal Bowl, Manual Drain, Bracket, Gauge #ad - Do not install a polycarbonate bowl in pressures that exceed 150 psi or where there is a presence of solvents harmful to polycarbonate. Pressure Gauge, Bracket Included. Units can be installed in any location on a single plane without requiring changes to existing piping. Sar regulators can be mounted either up or down, and the pressure is controlled using the adjustable locking knob.

Use metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.

#ad



TEKTON 46363 1/2-Inch I.D. by 6-Foot 250 PSI Rubber Lead-In Air Hose with 1/2-Inch MPT Ends

#ad
Michigan Industrial Tools 46363 #ad - Solid brass end connectors never corrode and seal better against leaking than aluminum, steel, or zinc. Rubber lead-in air hose is ideal for connecting supply lines, hose reels, compressors, and other system components. Even in the deep cold, its flexibility prevents vibrations from moving parts from traveling through the system and loosening connections or causing leaks.

Npt male ends, the TEKTON 6 ft. Outfitted with 1/2 in. X 1/2 in. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. California warning: this product contains chemicals, known to the State of California to cause cancer, including lead, birth defects or other reproductive harm.

TEKTON 46363 1/2-Inch I.D. by 6-Foot 250 PSI Rubber Lead-In Air Hose with 1/2-Inch MPT Ends #ad - I. D. Made in the USA. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Please wash your hands after use. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Flexible rubber stays soft and easy to work with even at -40 degrees F.

#ad



TEKTON 46362 1/2-Inch I.D. by 3-Foot 250 PSI Rubber Lead-In Air Hose with 1/2-Inch NPT Male Ends

#ad
Michigan Industrial Tools 46362 #ad - Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Even in the deep cold, its flexibility prevents vibrations from moving parts from traveling through the system and loosening connections or causing leaks. Solid brass end connectors never corrode and seal better against leaking than aluminum, steel, or zinc.

Flexible rubber stays soft and easy to work with even at -40 degrees F. Made in the USA. Outfitted with 1/2 in. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Rubber lead-in air hose is ideal for connecting supply lines, hose reels, compressors, and other system components.

TEKTON 46362 1/2-Inch I.D. by 3-Foot 250 PSI Rubber Lead-In Air Hose with 1/2-Inch NPT Male Ends #ad - I. D. Flexible rubber stays soft and easy to work with even at -40 degrees F. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. Npt male ends, the TEKTON 3 ft. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. X 1/2 in. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F.

#ad



Anderson Metals 56122 Brass Pipe Fitting, Hex Nipple, 1/2" x 1/2" NPT Male Pipe

#ad
Anderson Metals 56122-08 #ad - Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Hex nipple for connecting two threaded pipes or fittings. Made in the USA. And its territories. Flexible rubber stays soft and easy to work with even at -40 degrees F. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to +250 degrees F.

Anderson Metals 56122 Brass Pipe Fitting, Hex Nipple, 1/2" x 1/2" NPT Male Pipe #ad - The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. The fitting has an operating temperature range of -65 to +250 degrees F. Flexible rubber stays soft and easy to work with even at -40 degrees F.

Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. The company, founded in 1951, is headquartered in Kansas City, MO.

#ad



Maxline M3800 Master Kit, 1/2-Inch x 100-Feet

#ad
Rapidair Maxline M3800 #ad - Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Hex nipple for connecting two threaded pipes or fittings. Set up a compressed air system with the 1/2-Inch Maxline Master Kit with 3 air outlet locations. Compression style nickel plated brass fittings. And its territories. Kit includes: 100 ft; of 1/2-inch tubing, 3 air outlet kits, 5 elbow fittings, compressor manifold kit, deburr and cutter tool.

175 psi maximum working pressure, 1/2-Inch inside diameter x 5/8-Inch outside diameter. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Tubing holds any hand bent shape. Easy to expand with more air outlet locations or modify later. Use only with Maxline 1/2-Inch system. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations.

Maxline M3800 Master Kit, 1/2-Inch x 100-Feet #ad - Made in the USA. Flexible rubber stays soft and easy to work with even at -40 degrees F. Recommended usage 75 ft. Maximum from the air compressor, up to 2000 sq. Ft.

#ad



Maxline M8064 Pipe Clip for 1/2-Inch Tubing, 10-Pack

#ad
Rapidair Maxline M8064 #ad - Use only with Maxline 1/2-Inch system. Recommended usage 75 ft. Maximum from the air compressor, up to 2000 sq. Ft. Buildings, up to 5-HP air compressor. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. Use only with Maxline 1/2-Inch system. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

S. A. And its territories. Kit includes: 100 ft; of 1/2-inch tubing, 3 air outlet kits, compressor manifold kit, 5 elbow fittings, deburr and cutter tool.175 psi maximum working pressure, 1/2-Inch inside diameter x 5/8-Inch outside diameter. Single mounting screw hole. Single mounting screw hole allows for fast installation time.

Maxline M8064 Pipe Clip for 1/2-Inch Tubing, 10-Pack #ad - Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Black color. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Flexible rubber stays soft and easy to work with even at -40 degrees F.

#ad



PneumaticPlus RED EPDM Synthetic Rubber Air & Water Hose 1/2" ID x 0.84" OD with 1/2" NPT Swse 1/2" ID x 0.84" OD with 1/2" NPT Swivel Male Fitting Connections 3 FT

#ad
Pneumatic Plus #ad - Air, water & multipurpose Hose is designed to meet these need using EPDM synthetic rubber technology. Pressure: 300 PSI. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. Recommended usage 75 ft.

Maximum from the air compressor, up to 2000 sq. Ft. Buildings, up to 5-HP air compressor. Use only with Maxline 1/2-Inch system. Black color. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Red hose: lenght: 3 feet, 1/2" id x 084" od hose with 1/2" Male NPT Swivel Connector. Max.

PneumaticPlus RED EPDM Synthetic Rubber Air & Water Hose 1/2" ID x 0.84" OD with 1/2" NPT Swse 1/2" ID x 0.84" OD with 1/2" NPT Swivel Male Fitting Connections 3 FT #ad - Compression style nickel plated brass fittings. Reinforced for extra strength, ideal for -40 to 190 Fahrenheit temerature range. And its territories. Kit includes: 100 ft; of 1/2-inch tubing, 5 elbow fittings, 3 air outlet kits, compressor manifold kit, deburr and cutter tool.175 psi maximum working pressure, 1/2-Inch inside diameter x 5/8-Inch outside diameter.

#ad



Milton S-1094-8 1/2" FNPT Full Port Heavy-Duty Brass Ball Valve

#ad
Milton S-1094-8 #ad - Hex nipple for connecting two threaded pipes or fittings. Flexible rubber stays soft and easy to work with even at -40 degrees F. Reinforced for extra strength, ideal for -40 to 190 Fahrenheit temerature range. Air, water & multipurpose Hose is designed to meet these need using EPDM synthetic rubber technology.

Max. Black color. Made in usa. Male npt threads for connecting to female threaded pipes. Creates a flexible connection from rigid supply line to hose reel to isolate vibrations. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations.

Milton S-1094-8 1/2" FNPT Full Port Heavy-Duty Brass Ball Valve #ad - Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Flexible rubber stays soft and easy to work with even at -40 degrees F. Universal design: to be used with any system supplying compressed air, water or oil without disruption. Red hose: lenght: 3 feet, 1/2" id x 084" od hose with 1/2" Male NPT Swivel Connector.

Compression style nickel plated brass fittings. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

#ad



Maxline M8010 Equal Tee Fitting for 1/2-Inch Tubing

#ad
Rapidair Maxline M8010 #ad - Hex nipple for connecting two threaded pipes or fittings. Creates a flexible connection from rigid supply line to hose reel to isolate vibrations. Max. Npt: 1/2" female national pipe threads. 175 psi maximum working pressure. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

S. A. Red hose: lenght: 3 feet, 1/2" id x 084" od hose with 1/2" Male NPT Swivel Connector. Pressure: 300 PSI. Since 1943 milton has been producing Quality Air Accessories. Use only with Maxline 1/2-Inch system. Made in usa. Use only with Maxline 1/2-Inch system. Single mounting screw hole. Compression style nickel plated brass fittings.

Maxline M8010 Equal Tee Fitting for 1/2-Inch Tubing #ad - . Use only with Maxline 1/2-Inch system. The maxline 1/2-inch tubing x 1/2-inch tubing x 1/2-Inch tubing, Tee fitting, features a compression fitting style to make fast and easy connections. Universal design: to be used with any system supplying compressed air, water or oil without disruption.

#ad



Diversitech MP4-E E.V.A. Anti-Vibration Pad, 4" x 4" x 7/8" Pack of 4

#ad
Diversitech MP4-E E.V.A. Anti-Vibration Pad CECOMINOD065510 #ad - Use only with Maxline 1/2-Inch system. Max. Refrigeration and air conditioning, or other high vibration and noise associated with HVAC equipment or machinery. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Eva - used as the core vibration dampening material. Made in the USA.

This rubber is a styrene butadiene rubber with aggressive tensile strength, and elongation characteristics suitable for the application. Npt: 1/2" female national pipe threads. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Nylon material for long lasting strength. Milton is your number 1 source for Quality Air Accessories.

Diversitech MP4-E E.V.A. Anti-Vibration Pad, 4" x 4" x 7/8" Pack of 4 #ad - Reinforced for extra strength, ideal for -40 to 190 Fahrenheit temerature range. And its territories. Kit includes: 100 ft; of 1/2-inch tubing, 3 air outlet kits, compressor manifold kit, 5 elbow fittings, deburr and cutter tool.175 psi maximum working pressure, 1/2-Inch inside diameter x 5/8-Inch outside diameter.

Creates a flexible connection from rigid supply line to hose reel to isolate vibrations. Made in the USA. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

#ad



MaxLine RapidAir M8038 1/2" In Line Ball Valve For 1/2" Max Line Air Tubing

#ad
Rapidair Maxline #ad - Npt: 1/2" female national pipe threads. Milton is your number 1 source for Quality Air Accessories. Specifications: part number: m8038 solid brass nickel plated 175 max psi Double O-Ring Sealed For Use with 1/2" MaxLine Air Piping System Makes a flexible connection from rigid supply line to hose reel to isolate vibrations.

Pressure: 300 PSI. Makes a flexible connection from rigid supply line to hose reel to isolate vibrations. Spiral yarn reinforcement prevents wall failures at temperatures up to 190 degrees F. Red hose: lenght: 3 feet, 1/2" id x 084" od hose with 1/2" Male NPT Swivel Connector. Use only with Maxline 1/2-Inch system.

MaxLine RapidAir M8038 1/2" In Line Ball Valve For 1/2" Max Line Air Tubing #ad - Universal design: to be used with any system supplying compressed air, water or oil without disruption. Solid brass connectors never corrode and seal better than aluminum, steel, or zinc. Hex nipple for connecting two threaded pipes or fittings. Nylon material for long lasting strength. Since 1943 milton has been producing Quality Air Accessories.

Quarter-turn valve: will not restrict flow and ensures full pressure coming through the valve. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

#ad