Neewer Carbon Fiber Dual Handheld Grip for Zhiyun Crane/Crane M/Crane V2 Neewer Crane/Crane M/Crane V2 3-Axis Handheld Stabilizer, 18.8 inches/48 centimeters Non-slip Light-weight Durable Camera Grip

Neewer 10091833 - Description: the dual handheld grip is specially designed for Neewer Crane/Crane M 3-Axis, Zhiyun Crane and Zhiyun Crane M 3 Axis Stabilizer. 1/4-inch screw hole: two 1/4-inch screw holes on the grip enable you to connect monitor, Bluetooth remote or any other accessories to your cameras. Two 1/4-inch screw holes allow you to attach accessories to your camera, such as monitor, bluetooth remote and so forth.

. Camera, gimbal stabilizer, Monitor and other accessories are NOT included. Lightweight and durable: Mainly made of carbon fiber, lightweight yet durable; Allows you to flexibly use the gimbal during shooting. The lightweight and durable aerospace carbon fiber material makes the grip portable, and with the grip, you can save a lot energy and time to obtain a nice shooting.

Neewer Carbon Fiber Dual Handheld Grip for Zhiyun Crane/Crane M/Crane V2 Neewer Crane/Crane M/Crane V2 3-Axis Handheld Stabilizer, 18.8 inches/48 centimeters Non-slip Light-weight Durable Camera Grip - Add more convenience to shooting. The dual handheld grip is a tailor-made tool, which spares more room for creation with both hands. Multi-choices of holding ways: provide various shooting waysincluding positive grip gesture and inverted grip gesture; Can realize shooting in different angles, and finish the shooting in most of circumstances.

Note: only the dual Handheld Grip is included. It enables you to shift from one hand to two hands easily when shooting, and the non-slip design adds security to the camera, make sure the camera still hold in position after long time operation. Specification: material: Carbon Fiber Color: Black Length: 48 centimeters/18.





Upgraded PERGEAR Aluminum Mini Tripod Tabletop Stand for Zhiyum Crane V2 Zhiyun Crane-M Zhiyun Smooth Q Zhiyun Smooth 3 III II Moza Air Moza Mini-C Moza Mini-G Feiyu G4 Pro Godox A1 Phone Flash

PERGEAR Aluminum Mini Tripod - The tripods have been upgraded with A New Complete Sturdy ScrewSee Second Photo for More Details. Soft plastic Foot Pad. Aluminum mini Tripod, Lightweight, Durable and Portable. 1/4 screw thread, Wide Compability.





with PERGEAR Cleaning Cloth - Zhiyun ZW-B02 Wireless Thumb Controller for Zhiyun Crane Crane-M Smooth-II Smooth 3 Smooth-Q Rider-M Gimbal Stabilizer

Zhiyun ZW-B02+PERGEAR Cleaning Cloth - Shifter lever: Allows Focusing Control of the Camera. The tripods have been upgraded with A New Complete Sturdy ScrewSee Second Photo for More Details. 1/4 screw thread, Wide Compability. Note: for zhiyun zw-b02 and smartphone, it only allows 1 device to connect to the gimbal. Power/shutter button: power on/off the controller by pressing it for 1 to 2 sec.

After the gimbal is connected to the camera, half-press activates Focus, under Camera Mode, then Completely Press the button to take photos; Double Click the button Completely can switch between Record Function and Camera Function. Power button + shifter lever: push the shifter lever in w direction simultaneously when powering up to enter Slave Mode.

This allows firmware upgrade of the remote controller through mobile APPRequires Bluetooth pairing with the smartphone using Zhiyun Assistant. Power button + mode button: press the MODE Button simultaneously when powering up to opeate quick pairing with the nearest stabilizer. Joystick: control camera's Movement.

with PERGEAR Cleaning Cloth - Zhiyun ZW-B02 Wireless Thumb Controller for Zhiyun Crane Crane-M Smooth-II Smooth 3 Smooth-Q Rider-M Gimbal Stabilizer - Wide compatible with follow focus function for zhiyun crane 2 zhiyun crane v2 zhiyun crane-M Smooth-Q Smooth 3 Smooth-II Crane Plus Shining Rider-M Gimbal Stabilizer. Specifications: charging voltage: 5v charging current: 100mA Theoretical Work Time: ≥30hr Built-in Polymer Lithium Battery Capacity: 150mAh Emission and received current: 11.

9ma operating Current: 4. 2ma effective control distance: 10m/394inchwithout blockage bluetooth indicator no connection: continuous flashing connected: shines solid light power level indicator 90%-100%: quick flash for 4 times each second 75%-90%: quick Flash for 3 times each second 55%-75%: Quick Flash for 2 times each second 30%-55%: Quick Flash once each second 0%-30%: Quick Flashing Charging Indicator Charging: RED Light Charging Complete: GREE Light PACKAGE CONTENTS: 1 * Wireless Remote Controller 1 * Micro USB Cable 1 * Mounting Buckle 1 * PERGEAR Cleaning Cloth Soft plastic Foot Pad.





1138 - SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI

SMALLRIG 1138 - It can lock the rod on the cage via the clamp tightened by the locking knob. This allows firmware upgrade of the remote controller through mobile APPRequires Bluetooth pairing with the smartphone using Zhiyun Assistant. Power button + mode button: press the MODE Button simultaneously when powering up to opeate quick pairing with the nearest stabilizer.

Joystick: control camera's Movement. After the gimbal is connected to the camera, under camera Mode, Half-Press activates Focus, then Completely Press the button to take photos; Double Click the button Completely can switch between Record Function and Camera Function. Power button + shifter lever: push the shifter lever in w direction simultaneously when powering up to enter Slave Mode.

1138 - SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI - 1/4 screw thread, Wide Compability. Aluminum mini Tripod, Lightweight, Durable and Portable. The tripods have been upgraded with A New Complete Sturdy ScrewSee Second Photo for More Details. Wide compatible with follow focus function for zhiyun crane 2 zhiyun crane v2 zhiyun crane-M Smooth-Q Smooth 3 Smooth-II Crane Plus Shining Rider-M Gimbal Stabilizer.

Smallrig multi-function double Ballhead with Clamp & 1/4" Screw 1138 1. It can mount monitor and LED Lights on the one end via 1/4'' screw. Note: for zhiyun zw-b02 and smartphone, it only allows 1 device to connect to the gimbal.





Zhiyun ZW-B02 Wireless Remote Control for Zhiyun Rider-M Crane Crane-M Smooth-2 Smooth-3 Smooth-Q Gimbal Stabilizer

Zhiyun 4332298930 - This wireless remote control is suitable for Zhiyun Rider-M, Crane-M, Crane, Smooth-2, Smooth-3 and Smooth-Q gimbal stabilizer. Mode button: switches between gimbal control modes works like the MODE button on the stabilizer. Power/shutter dual-function button: power on/off the remote controller by pressing the Power button for 1s to 2s, half-press for focusing, under camera mode, the indicator light will turn on/off accordingly.

Specifications: brand: zhiyun model: zw-b02 compatible models: for zhiyun rider-m, smooth-2, crane, crane-m, smooth-3 and Smooth-Q gimbal Charging Voltage: 5V Charging Current: 100mA Theoretical Work Time: ≥30 hours Built-in Polymer Lithium Battery Capacity: 150mAh Emission and Received Current: 11.

Zhiyun ZW-B02 Wireless Remote Control for Zhiyun Rider-M Crane Crane-M Smooth-2 Smooth-3 Smooth-Q Gimbal Stabilizer - 9ma operating Current: 4. 2ma effective control distance: 10m / 394 inch without blockage Package Size: 13. 8 * 12 * 4. 6cm / 5. 4 * 4. 7 * 1. 8in package weight: 143g / 5. 1ozpackage list: 1 * wireless remote control 1 * buckle 1 * micro USB Cable 1 * User Manual English & ChineseNote: The remote controller turns off automatically when left idle for 2 minutes.

When gimbal is connected with camera, fully press the shutter button for shooting images; quickly double-press fully press down to switch between video recording function and photographed function.





Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer 3 32Bit MCUs Brushless Motors With Encoders for Mirrorless Camera Sony A7 Series Panasonic LUMIX Series Nikon J Series Canon M Series

Zhiyun Crane V2 - Never leave the battery unattended during charging to preventany accident. Aluminum mini Tripod, Lightweight, Durable and Portable. Charging the battery with its temperature over 45°C or lower than 0°C may lead to leakage, overheating, or damage. The first handheld gimbal with cci camera control interface, thus the camera's shutter and focus can be controlled by the buttons on gimbal's handle.

2. Do not put the battery and charger near flammable materials or on flammable surfacessuch as carpet or wood. 3. Do not charge the battery immediately after use. Wide compatible with follow focus function for zhiyun crane 2 zhiyun crane v2 zhiyun crane-M Smooth-Q Smooth 3 Smooth-II Crane Plus Shining Rider-M Gimbal Stabilizer.

Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer 3 32Bit MCUs Brushless Motors With Encoders for Mirrorless Camera Sony A7 Series Panasonic LUMIX Series Nikon J Series Canon M Series - This wireless remote control is suitable for Zhiyun Rider-M, Smooth-2, Crane, Crane-M, Smooth-3 and Smooth-Q gimbal stabilizer. Mode button: switches between gimbal control modes works like the MODE button on the stabilizer. Power/shutter dual-function button: power on/off the remote controller by pressing the Power button for 1s to 2s, under camera mode, half-press for focusing, the indicator light will turn on/off accordingly.

1/4 screw thread, Wide Compability. Supports 2 x 26500 batteriesIncluded, provides 6 hours and 12 hours operating time respectively. Please read the instructional Manual carefully before using the products, especially Page 5 for Battery Safety Guidelines.





Zhiyun Crane Zhiyun Crane-M Zhiyun Crane Plus Control Cable for Sony Supports Taking Photos/Recording Videos/Focusing/Zoom in/Zomm Out

ZHIYUN Control Cable-Sony - This allows firmware upgrade of the remote controller through mobile APP requires Bluetooth pairing with the smartphone using Zhiyun Assistant. Power button + mode button: press the mode button simultaneously when powering up to operate quick pairing with nearest stabilizer. Positive grip, low angle, high flight photography.

The industry's first to achieve three 32-bit mcus running in parallel at incredible 4k hertz. Connect the stabilizer to computer or APP. Randomly touch the phone screen anywhere, and then press "Save" button. Note: for zhiyun zw-b02 and smartphone, it only allows 1 device to connect to the gimbal. Power/shutter button: power on/off the controller by pressing it for 1 to 2 sec.

Zhiyun Crane Zhiyun Crane-M Zhiyun Crane Plus Control Cable for Sony Supports Taking Photos/Recording Videos/Focusing/Zoom in/Zomm Out - 3. Can't speak for nex-5 or NEX-7 models but I assume the same. And no, you truly cannot use a basic cheap micro USB to micro USB cable. Aluminum mini Tripod, Lightweight, Durable and Portable. The tripods have been upgraded with A New Complete Sturdy ScrewSee Second Photo for More Details. The cable connects to the camera and stabilizer by way of a micro USB port.

Soft plastic Foot Pad.





Zhiyun Wireless Remote Control for Zhiyun Crane-Plus/Crane V2/Crane-M Gimbal StabilizerZW-B02

Zhiyun Official ZY08ZWB02 - Any shooting requirements will be perfectly satisfied, i. E. Joystick: Controls camera movement. Supports 2 x 26500 batteriesIncluded, provides 6 hours and 12 hours operating time respectively. Support functions: take photos/ Record videos/Focusing/Zoom In/Zomm Out. The first handheld gimbal with cci camera control interface, thus the camera's shutter and focus can be controlled by the buttons on gimbal's handle.

3 operation modes. Shifter lever: Allows Focusing Control of the Camera. Smallrig multi-function double ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top. It can mount monitor and led lights on the one end via 1/4'' screw, and it can lock the rod on the cage via the clamp tightened by the locking knob.

Zhiyun Wireless Remote Control for Zhiyun Crane-Plus/Crane V2/Crane-M Gimbal StabilizerZW-B02 - It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting. The rod clamp fits dji ronin & freefly movI Pro & all 30mm rods and can also be adjusted with ease. The best load < 1. 21kg. This wireless remote control is suitable for Zhiyun Rider-M, Crane, Smooth-2, Crane-M, Smooth-3 and Smooth-Q gimbal stabilizer.

Mode button: switches between gimbal control modes works like the MODE button on the stabilizer.





Vktech Black Camera 323 Quick Release Plate

Vktech TALT-PN-733651360 - Description: 1/4'' metal screw attachment to attach to your camera durable rubber pad to stop expensive slips full manfrotto 200-PL14 compatibility Screwless designed D-Ring to attach/detach quickly from your camera New generic Camera Quick Release Plate Mount your camera on a tripod easily with this quick release plate This camera quick release plate will quickly screw onto your tripod to properly and securely position your camera for the best shooting angle Material: Metal alloy Color: Black Size: Approx.

1. Mode button: switches between gimbal Control Modes, freely change between Single-Hand/Dual-Hand Operation. 2. The wireless remote control is suitable for Zhiyun Gimbal Stabilizer, including Crane-Plus, Crane V2, Crane-M, Crane gimbal stabilizer.3. Made of aerospace aluminum alloy, Lightweight and Durable. 4.

Vktech Black Camera 323 Quick Release Plate - There are two 1/4 screws on the grip, for connecting monitor, bluetooth remote or any other accessories with your cameras. 5. Note: not recommended compatible with Crane 2 and Smooth series. Powerful mcus microcontroller unit combined with Zhiyun's efficient attitude control algorithm and advanced servo control algorithm, the gimbal is able to sense, compute then control the camera to a 0

01-degree accuracy, within 0





Standard 1/4"-20 Male to 1/4"-20 Male Threaded Tripod Screw Adapter Standard Tripod Mounting Thread Camera Screw Adapter Converter, Precision Made 5 Pack

Anwenk camera 1/4" screw adapter 5 pack - This allows firmware upgrade of the remote controller through mobile APP requires Bluetooth pairing with the smartphone using Zhiyun Assistant. Power button + mode button: press the mode button simultaneously when powering up to operate quick pairing with nearest stabilizer. The first handheld gimbal with cci camera control interface, thus the camera's shutter and focus can be controlled by the buttons on gimbal's handle.

Any shooting requirements will be perfectly satisfied, i. E. You may also contact us to confirm the Compability with Your Set Up before Your Purchase:. With the automotive grade magnetic encoders attached to each motor, upright shooting, the gimbal can sense every 002-degree change intervals. Standard tripod mounting thread.

Standard 1/4"-20 Male to 1/4"-20 Male Threaded Tripod Screw Adapter Standard Tripod Mounting Thread Camera Screw Adapter Converter, Precision Made 5 Pack - Note: for zhiyun zw-b02 and smartphone, it only allows 1 device to connect to the gimbal. Power/shutter button: power on/off the controller by pressing it for 1 to 2 sec. This is international standard precision made 1/4" Male to 1/4" Male threaded screw adapter. Very Solid and durable. Practical to use. 1/4'' metal screw Attachment to attach to your camera.





VILTROX DC-70 II 4K HDMI Field Monitor 7" TFT LCD HD Video Monitor HDMI AV Input 1024 600 for DSLR Camera Canon Nikon + Rechargeable NP-F550 Battery + Charger

VILTROX ZH-00015 - Aluminum mini Tripod, Lightweight, Durable and Portable. Powerful mcus microcontroller unit combined with Zhiyun's efficient attitude control algorithm and advanced servo control algorithm, the gimbal is able to sense, compute then control the camera to a 001-degree accuracy, within 025 millisecond. Built-in wireless control module can be connected with zhiyun's gimbal remote controller or smartphone APP which can also be used for wireless control and firmware upgrade.

3 operation modes. It can display HDMI video output from the camera. Any shooting requirements will be perfectly satisfied, i. E. Supports 2 x 26500 batteriesIncluded, provides 6 hours and 12 hours operating time respectively. Support functions: take photos/ Record videos/Focusing/Zoom In/Zomm Out. This product come from Vktech, Choose Vktech is choose original, choose genuine.

VILTROX DC-70 II 4K HDMI Field Monitor 7" TFT LCD HD Video Monitor HDMI AV Input 1024 600 for DSLR Camera Canon Nikon + Rechargeable NP-F550 Battery + Charger - 480g excluding battery color: black operating temperature: +0 to +40°c +32 to +104°f storage temperature: -20 to +60°c -4 to +140°f power supply: dc 8v~18v battery: fm500h / input jack 2 av ×1 input jack 3 dc in power adapter plug input jack 4 usb upgrade jack output jack:headphones output jack / qm71d / qm91D Panel LCD panel size: Approx 7’’ Resolution: 1280×800 pixels Speaker: Yes Input jack: Input jack 1 HDMI ×1 / Output jack 1 HDMI ×1 LCD Monitor x 1 Sun shade hood × 1 Standard shoe × 1 > HDMI Cable Type A-Type C × 1 Protective Bag x 1 F550 battery gift x 1 Battery Chargergift x 1 Original Packing x 1 Soft plastic Foot Pad.

Shifter lever: Allows Focusing Control of the Camera. Smallrig multi-function double ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top.