Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter – Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4″ FHT

Habitech - Please make sure your tubing specifications fall within these ranges for THE PROPER FIT. With reliable universal fit, these drip system head irrigation adapters are essential drip irrigation supplies. Simply loosen nut to remove tubing. 3 twist collar counter-clockwise to secure tubing or tape. Perfect irrigation riser part for conversion of 1/2" tubing to your faucet head attachment, garden hose or soaker hose.

2 firmly push the end of the irrigation tubing over the exposed barb. Just insert and twist, no special tools needed. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip line is pushed on. Specifications: 3/4" female hose thread x 1/2" or 5/8" Tubing Acceptable Inside Diameter: 0

Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT - 520 - 0620 in 13. 2 to 15. 7mm acceptable Wall Thickness: 0045 to 0055 in 1. 14 to 1. 40mm for use with 16 mm, 17 mm and 18 mm tubing materials: glass reinforced polypropylene operating pressure up to 60 psi positive stop to assure tubing is fully installed Low effort, quickly locks in place, no special tools needed Barbed head ensures distribution tubing will not slip out or blow off at high pressure and temperature To connect Total CV and poly / polyethylene supply tubing or distribution hose tubing Removable lock collar - for flushing or winterizing the drip system Approved for use in waste water systems Easy to use.





Rain Bird A50927US T63-100S Drip Irrigation 1/2" .630" OD Blank Distribution, 100' Roll Black

Rain Bird T63-100 - High quality, flexible 1/2" blank distribution tubing used to run water to landscaped areas to connect 1/2” Emitter Tubing, or tapped into with 1/4" fittings for use with micro-watering devices. Unique micro-Porous design creates an ultra-tight connection to fittings. Just cut, place and connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes sold separately.

Unique micro-Porous design creates an ultra-tight connection to fittings. Self-dispensing coil reduces layout time and speeds installation. Specifications: outside diameter 063"; inside diameter 054"; wall thickness 0045”; pressure range 0 to 70 PSI. Rain bird “the intelligent use of water” Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas.

Rain Bird A50927US T63-100S Drip Irrigation 1/2" .630" OD Blank Distribution, 100' Roll Black - Professional-grade; won't clog and requires no maintenance. Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation. Black with double green stripe for easy identification. Unique compact coiling method allows tubing to remain coiled as its extracted making it easy to use, store and eliminates waste.

Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage.





Rain Bird HT07525PSI Drip Irrigation 25 PSI Pressure Regulator, 3/4" Female Hose Thread x 3/4" Male Hose Thread

Rain Bird HT07525PS - Maintains optimum 25 PSI pressure and water flow to Drip lines and emitter devices. This drip irrigation pressure regulator connects quickly, and easily to any 3/4” male pipe threaded MPT outdoor faucet, garden hose or component. Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage.

Operates under constant pressure providing a maximum flow rate of 20 gallons per minute. Constructed of highly durable UV and chemical-resistant materials. Constructed of highly durable UV and chemical-resistant materials to assure long life. Simply thread into place; take care fitting is fully tightened so rubber gasket can correctly seal assuring leak-proof performance.

Rain Bird HT07525PSI Drip Irrigation 25 PSI Pressure Regulator, 3/4" Female Hose Thread x 3/4" Male Hose Thread - To automate your system, add a Rain Bird 1ZEHTMR Hose-End Timer sold separately. Connects easily to your faucet, garden hose, or existing underground sprinkler head with Rain Bird conversion kits. Properly regulates water pressure and flow to a Drip irrigation system; maintaining optimum 25 PSI pressure and water flow to Drip lines and emitter devices.

Durable, robust design provides reliable operation. Connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes sold separately. Self-dispensing coil reduces layout time and speeds installation. Unique micro-Porous design creates an ultra-tight connection to fittings.





Rain Bird BE50/4PK Drip Irrigation Universal Barbed Elbow Fitting, Fits All Sizes of 5/8", 1/2", .700" Drip Tubing, 4-Pack

Rain Bird BE50/4PKS - Unique micro-Porous design creates an ultra-tight connection to fittings. Convenient plastic bag contains 4 elbows. Rain bird "the intelligent use of water" Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas. Professional-grade; won't clog and requires no maintenance.

Maintains optimum 25 PSI pressure and water flow to Drip lines and emitter devices. Connects easily to your faucet, garden hose, or existing underground sprinkler head with Rain Bird conversion kits. Connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes sold separately.

Rain Bird BE50/4PK Drip Irrigation Universal Barbed Elbow Fitting, Fits All Sizes of 5/8", 1/2", .700" Drip Tubing, 4-Pack - The perfect choice to repair or extend tubing in a Drip irrigation system. Connector for use with 1/2" and 5/8" Drip irrigation tubing. 20 gallon per minute flow through capacity. Constructed of highly durable UV and chemical-resistant materials. To automate your system, add a Rain Bird 1ZEHTMR Hose-End Timer sold separately.

Connects to any 3/4" male pipe threaded faucet, garden hose or component. Recommended for 0 to 50 PSI operating pressure. This universal barbed elbow is designed to quickly and easily connect two lengths of 1/2" Drip tubing in an "L" shape.





Perma-Loc Size : 1/2"- 5 Pack - Drip Depot Irritec Perma-Loc Tubing End Cap

- Self-dispensing coil reduces layout time and speeds installation. Connector for use with 1/2" and 5/8" Drip irrigation tubing. Constructed of highly durable UV and chemical-resistant materials. Durable, robust design provides reliable operation. Unique micro-Porous design creates an ultra-tight connection to fittings.

Barbed ends grab tubing for a secure leak-proof connection. Constructed of highly durable UV and chemical-resistant materials to assure long life. Connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes sold separately. Hose thread fittings are not compatible with pipe threads PVC or iron.

Perma-Loc Size : 1/2"- 5 Pack - Drip Depot Irritec Perma-Loc Tubing End Cap - 20 gallon per minute flow through capacity. Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage. 100% satisfaction Guarantee. The threads and cap on these fittings are standard garden hose threads and are compatible with most outdoor water spigots and common garden hoses.

Rugged, flower bed, flexible tubing that's easy to unroll and stake in garden, ground cover or other landscaped areas. Professional-grade; won't clog and requires no maintenance. Lifetime Warranty on Products.





MIXC 100ft 1/4 inch Blank Distribution Tubing Drip Irrigation Hose Garden Watering Tube Line

MIXC - Pack of 5 individual units. Unique micro-Porous design creates an ultra-tight connection to fittings. Before assembling, please put the connected part of the tubing into hot water for 10 seconds. Advantage:1. 1/4" distribution tubing is the strongest and most flexible tubing available to extend emitter devices to desired watering areas.

2. Unique micro-Porous design creates an ultra-tight connection to fittings. Barbed ends grab tubing for a secure leak-proof connection. Self-dispensing coil reduces layout time and speeds installation. Connector for use with 1/2" and 5/8" Drip irrigation tubing. 20 gallon per minute flow through capacity. Specifications:color: blackOutside diameter: 1/4"Inside diameter: 0

MIXC 100ft 1/4 inch Blank Distribution Tubing Drip Irrigation Hose Garden Watering Tube Line - 17"wall thickness: 04"pressure rating: 0 to 60 psipackage:1* 1/4"  irrigation Tubing Rugged, flower bed, flexible tubing that's easy to unroll and stake in garden, ground cover or other landscaped areas. Professional-grade; won't clog and requires no maintenance. Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage.

Designed for underground or above-ground installation. To automate your system, add a Rain Bird 1ZEHTMR Hose-End Timer sold separately.





Axe Sickle Pack of 50 Drip Emitters Perfect for 4mm / 7mm Tube, Adjustable 360 Degree Water Flow Drip Irrigation System for Flower beds, Vegetable Gardens, Herbs Gardens.

Axe Sickle - Constructed of highly durable UV and chemical-resistant materials to assure long life. I would recommend filling a thermos with boiling water to dip your 1/4" hose into as you assemble your lines. To automate your system, add a Rain Bird 1ZEHTMR Hose-End Timer sold separately. Connects to any 3/4" male pipe threaded faucet, garden hose or component.

It can be left out year-round, in any weather. Flexible: industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation in garden, flower bed, ground cover or other landscaped areas. Function:use as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering system.

Axe Sickle Pack of 50 Drip Emitters Perfect for 4mm / 7mm Tube, Adjustable 360 Degree Water Flow Drip Irrigation System for Flower beds, Vegetable Gardens, Herbs Gardens. - Compatible with most brands of 1/4" Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays. Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. 20 gallon per minute flow through capacity. Maintains optimum 25 PSI pressure and water flow to Drip lines and emitter devices.

Unique micro-Porous design creates an ultra-tight connection to fittings. Durable, robust design provides reliable operation. Designed for underground or above-ground installation.





Rain Bird T22-250S Drip Irrigation 1/4" Blank Distribution Tubing, 250' Roll, Black

Rain Bird T22-250S - Compact coiling method allows tubing to remain coiled as its extracted; making it easy to use, store and eliminates waste. Durable, robust design provides reliable operation. Versatile 1/4" blank distribution tubing may be used as the main line in a small Drip irrigation system or to branch off from 1/2" Drip tubing to individual micro- watering devices and plants.

Allows creation of a custom layout for your planting area. 30 day no question Asked Returns. Unique micro-Porous design creates an ultra-tight connection to fittings. To automate your system, add a Rain Bird 1ZEHTMR Hose-End Timer sold separately. Unique micro-Porous design creates an ultra-tight connection. Pack of 5 individual units.

Rain Bird T22-250S Drip Irrigation 1/4" Blank Distribution Tubing, 250' Roll, Black - Rain bird’s 1/4" distribution tubing is the strongest and most flexible tubing available; constructed of UV-resistant polyethylene resin materials giving it the flexibility of vinyl with the hold of poly. Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage.

Specifications: black, 0255" outside diameter, inside diameter 0165", wall thickness.





Orbit DripMaster 67468 1/2-Inch Universal End with Cap

Orbit Underground/Sunmate 67468 - Pack of 5 individual units. Same day shipping M-F to 5PM EST. Constructed of highly durable UV and chemical-resistant materials. Unscrew the cap for flushing or winterizing the drip system. 100% satisfaction Guarantee. Works with all major brands of 1/2-inch distribution tubing-. 620-inch-. 710-inch od. Mixc drip hose made by high quality, UV resistant materials, buried or on the surface, unmatched resistance to chemicals, algae growth and UV damage.

20 gallon per minute flow through capacity. Durable, robust design provides reliable operation. Connector for use with 1/2" and 5/8" Drip irrigation tubing. To connect, slide tubing over the insert and hand twist the outer nut to cinch the tubing in place. Unique micro-Porous design creates an ultra-tight connection to fittings.

Orbit DripMaster 67468 1/2-Inch Universal End with Cap - Drip watering saves water; especially important in drought conditions. Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage. I would recommend filling a thermos with boiling water to dip your 1/4" hose into as you assemble your lines. Recommended for 0 to 50 PSI operating pressure.

For outdoor use with cold water only.





6 Tees, 6 Couplings, 6 Elbows & 6 Tubing End Cap Closures - ActionEliters Irrigation Fittings Kit for 1/2" Inch Tubing 24 Piece Set - Barbed Connectors for Rain Bird 16mm .520 ID and Compatible Drip

ActionEliters - If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting. 4-pack of 1/2" barbed Elbow connectors in convenient plastic bag. Rugged, flower bed, flexible tubing that's easy to unroll and stake in garden, ground cover or other landscaped areas. Professional-grade; won't clog and requires no maintenance.

Actioneliters irrigation fittings kit for 1/2" tubing 24 piece set package includes: 6 Tees - This universal barbed "Tee" is designed to quickly and easily connect three lengths of 1/2" Drip tubing in a "T" shape. Be very careful you don't spill boiling water on yourself and wear gloves to handle the hot end.

6 Tees, 6 Couplings, 6 Elbows & 6 Tubing End Cap Closures - ActionEliters Irrigation Fittings Kit for 1/2" Inch Tubing 24 Piece Set - Barbed Connectors for Rain Bird 16mm .520 ID and Compatible Drip - Directs water exactly where you need it in a wide variety of planting areas Applies water similar to a spray head on an underground system. Water flow can be adjustable adjustable flow rate from 0 to 13 gallons-per-hour, ground cover, Suitable for pots, tubs, landscaped gardens and Etc. Money back guarantee: any quality question, we will reply within 24 hours to resolve.

Just feel free to contact us, all Axe Sickle products are fulfilled by Amazon with 100% guarantee fast shipment and good customer service. Rugged, flower bed, flexible tubing that's easy to unroll and stake in garden, ground cover or other landscaped areas. Use as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering devices.

Simply push the tubing firmly over the barbs for a secure leak-proof connection.